2
930 Installation Instructions 16
FIX AN AIR LEAK
12
STILL HAVE A LEAK?
Refer to the Troubleshooting section of the Instruction Manual. If the leak persists, or if there is an issue with
a leaking part, email us at rrtech@fsip.com. If emailing, please include photos to help us better diagnose and
understand any problems you may be experiencing.
LEAK AT AIR TUBING
AND AIR FITTING
LEAK AT BASE OF AIR FITTING
Release Air Tubing (see page 4).
Review proper cuts and procedures
in Step 5. Repeat Step 5.
Tighten Air Fitting one turn
or until leak stops.
1
Use the Air Command
™
Dual App
or Dual Remote to deflate the
Air Springs to 5 PSI.
See Step 9 or 10 for details.
EXHAUST ALL AIR FROM THE SYSTEM PRIOR
TO RELEASING AIR TUBING FROM AIR FITTINGS.
5
PSI
To Next Page
Loading...