2930
09-24
BEFORE YOU DRIVE, CONFIRM THE FOLLOWING:
Secure all Air Tubing and wiring.
The system passes the leak test and holds air.
The Air Compressor ground ring terminal is contacting bare metal, and coated with silicone if possible.
The Wire Harness is grounded to the negative (-) battery terminal. The ECU needs a good, clean,
interference-free ground.
There is a loop in the Air Tubing as shown to prevent water or debris from getting into the Air
Compressor head and damaging it.
Or, email us at rrtech@fsip.com. If emailing, please include photos to help us better diagnose and
understand any problems you may be experiencing.
CONNECT WITH US
@firestoneairide FirestoneAiride Firestone Airide
firestoneairide.com
To Next Page
Loading...