Need help?Do you have a question about the AIRLESSCO LP460 and is the answer not in the manual?
General| Brand | AIRLESSCO |
|---|---|
| Model | LP460 |
| Category | Paint Sprayer |
| Language | English |
Key safety warnings and precautions for operating the airless paint sprayer safely.
Warnings about severe injury from high pressure spray, fluid injection, and handling pressurized systems.
Precautions on solvent use and critical medical alerts for skin penetration injuries from spray fluid.
Safety rules for preparing the spray area, handling the spray gun, and protecting the spray tip.
Detailed steps to safely relieve pressure from the sprayer system before maintenance or shutdown.
A table addressing common spray gun issues, their causes, and recommended solutions.
A table listing common operational problems and their respective causes and solutions.
Step-by-step instructions for safely removing and reinstalling the fluid pump assembly.
Important warning to avoid turning the sensor during service procedures.
Essential warning against operating the machine without the protective cover guard in place.
Steps for disassembling the fluid pump and outlet valve for packing replacement.
Procedures for reassembling packings and reinstalling the fluid pump assembly.
Procedures for calibrating pressure and phase limit on the 4 Series electrical control board.
Procedures for zero, pressure, and LCD display calibration on 5/6 Series electrical control boards.
Comprehensive guide to diagnose and resolve issues when the 5/6 Series machine fails to start.
To Next Page