AirLive NVR4 - Page 10

To Next Page

To Previous Page

AirLive NVR4 User’s Manual

Network

Minimum 10/100 Ethernet (Gigabit

Ethernet is recommended)

Graphics Adapter

AGP or PCI-Express, minimum

1024×768, 16 bit colors

Software

Operating System

Microsoft® Windows® 2000

Professional, Windows® XP Professional

(32 bit) or Windows® Server 2003 (32 bit)

Browser

Microsoft Internet Explorer 6 or above

IP Camera

For WL-2000CAM, POE-100CAM,

POE-200CAM, OD-300CAM,

POE-100CAMv2, POE-200CAMv2,

WL-2600CAM, and POE-260CAM,

please upgrade it’s firmware to

LM.1.6.16.05 or above.

For POE-200HD, OD-600HD,

POE-250HD, OD-325HD and

POE-100HD, please upgrade it’s

firmware to 5.0.3713 or above.

You might find the last released firmware

on our web site:

http://www.airlive.com

Note: We highly recommend you to set your Screen resolution to 1024 x 768 or above for

getting the full experience of AirLive NVR4. Please also make sure your display DPI setting

is set to default at 96DPI, and you might right-click on desktop, choose “Settings” tab

“Advanced”  “General” for further configuring your desktop environment.

Note: If not specified, NVR means AirLive NVR4 in the following article.