airmaster TIGER 16/550

Questions and Answers

A
Amy MillerAug 16, 2025
What to do if my Airmaster Air Compressor has stopped and does not start?
- N
  Nicole WashingtonAug 16, 2025
  If your Airmaster Air Compressor has stopped and won't start, there are a few potential causes: * **Bad electrical connections:** Check, clean, and tighten the electrical connections. * **Overload cutout switch tripped:** Switch off the compressor, wait approximately 5 minutes, then press the reset button and switch it on again. * **Motor windings burnt out:** Contact your dealer for a replacement motor.
M
Matthew FischerAug 19, 2025
What to do if air is leaking from the non-return valve of my airmaster TIGER 16/550 when it is not running?
- A
  Audrey GarciaAug 19, 2025
  If air is leaking from the non-return valve of your Airmaster Air Compressor when it's not running, it could be due to a faulty non-return valve. Here's what you should do: 1. Drain the receiver completely of air. 2. Remove the valve end plug. 3. Carefully clean the valve seat and the gasket. 4. Reassemble.
M
markhodgesAug 22, 2025
Why airmaster TIGER 16/550 does not reach the set pressure and overheats easily?
- L
  Larry KellyAug 22, 2025
  If your Airmaster Air Compressor is not reaching the set pressure and overheats easily, it could be due to a blown compressor head gasket or a broken valve. Return the machine to your nearest service agent.
T
Tyrone GriffithAug 26, 2025
How to fix air pressure from the regulator that will not adjust on my airmaster TIGER 16/550?
- D
  Daniel JohnsonAug 26, 2025
  If the air pressure from the regulator on your Airmaster Air Compressor will not adjust, the diaphragm within the regulator body may be broken. Replace the regulator.
E
erika20Aug 28, 2025
What to do if my Airmaster Air Compressor is noisy and makes a metallic sound?
- C
  cynthialewisAug 28, 2025
  If your Airmaster Air Compressor is noisy and makes a metallic sound, the compressor might be damaged and needs an overhaul. Return the machine to your nearest service agent.
R
Robin ShannonAug 31, 2025
Why has my airmaster TIGER 16/550 stopped and will not start?
- C
  Chad IbarraAug 31, 2025
  If your Airmaster Air Compressor has stopped and won't restart, there are several potential causes. First, check the electrical connections, cleaning and tightening them if necessary. Second, the overload cutout switch may have tripped; in this case, switch the compressor off, wait approximately 5 minutes, press the reset button, and switch it back on. Lastly, if the motor windings are burnt out, you will need to contact your dealer for a replacement motor.
A
Angela ShieldsSep 3, 2025
How to fix air leaking from the non-return valve on my airmaster TIGER 16/550?
- M
  Mark BensonSep 3, 2025
  If air is leaking from the non-return valve when your Airmaster Air Compressor is not running, it indicates a faulty non-return valve. To resolve this, completely drain the receiver of air, remove the valve end plug, carefully clean the valve seat and the gasket, and then reassemble.
C
Cynthia EsparzaSep 6, 2025
Why will the air pressure from the regulator not adjust on my airmaster TIGER 16/550?
- W
  William ColeSep 6, 2025
  If the air pressure from the regulator on your Airmaster Air Compressor will not adjust, the diaphragm within the regulator body may be broken. The solution is to replace the regulator.
S
Samantha DouglasSep 9, 2025
What to do if my airmaster TIGER 16/550 doesn't reach set pressure and overheats?
- C
  castillojenniferSep 9, 2025
  If your Airmaster Air Compressor does not reach the set pressure and overheats easily, this could be due to a blown compressor head gasket or a broken valve. Return the compressor to your nearest service agent.
A
Antonio ReidSep 12, 2025
What causes my airmaster TIGER 16/550 Air Compressor to be very noisy and make metallic knocking sounds?
- L
  lovemichaelSep 12, 2025
  If your Airmaster Air Compressor is very noisy and makes a metallic knocking sound, it suggests the compressor is damaged and needs an overhaul. Return the compressor to your nearest service agent.

Summary

Introduction

Technical Data

Provides key specifications like power supply, dimensions, weight, capacity, pressure, and sound level.

Guarantee Information

Details the product warranty period, conditions for invalidity, and return procedures.

Parts and Servicing Contact

Lists contact numbers for obtaining spare parts, service, and customer support.

General Safety Warnings

Work Area Safety

Guidelines for maintaining a clean, well-lit work area and keeping children and bystanders away.

Personal Safety Precautions

Essential safety measures for operators, including alertness, eye/hearing protection, and avoiding hazards.

General Machine Use and Care

Airline Hoses Guidelines

Instructions for safe use, maintenance, and connection of air hoses and tools.

Air Compressor Safety Instructions

Safety Symbols Explained

Environmental Recycling Policy

Information on the proper disposal of the product according to WEEE regulations.

Electrical Connections and Safety

Assembly Instructions

Attaching Wheels

Step-by-step guide on how to attach the wheels to the compressor unit.

Attaching Support Feet

Instructions for fitting the support feet to ensure stability during operation.

Attaching Air Filter

Procedure for installing the air filter(s) correctly onto the compressor.

Moving the Air Compressor

Before Use Checks

Check Oil Level

Guide on how to check and maintain the correct oil level in the compressor's sightglass.

Operation Guide

Attaching Air Tools

Instructions on how to safely connect air tools and hoses to the compressor outlet.

Turning the Compressor On

Steps for powering up the compressor and its automatic operation cycle.

Check Safety Valve Function

Procedure to verify the correct operation of the compressor's safety valve.

Set Output Pressure

Guide on using the pressure regulator to adjust the air output pressure for tools.

Understanding Gauges

Explanation of the reservoir and outlet pressure gauges and their readings.

Removing Air Tools

Steps for safely disconnecting air tools from the hose after use.

Turning the Compressor Off

Procedure for safely shutting down and depressurizing the compressor.

Draining the Reservoir

Instructions for draining condensate from the reservoir after use or before storage.

Reset Button Function

Information on the thermal overload reset button and troubleshooting steps.

Maintenance Schedule

Daily Oil Level Check

Routine check of the oil level, adding oil if necessary, using SAE30.

Daily Reservoir Drain

Procedure for draining condensate from the reservoir daily.

Monthly Air Filter Cleaning

Guide for cleaning the air filter monthly or more often in dusty conditions.

Cleaning and Storage

Tips for keeping the compressor clean and storing it properly in a dry location.

Troubleshooting Guide

Declaration of Conformity

Component Parts List