Airspan AirSpeed 1000 - 1 Introduction; Airspeed 1000; Figure 2: Airspeed 1000 Front View

AirSpeed 1000 Installation Guide
DUG01289 Airspan Commercial and Internal Use 13
1 Introduction
This section provides a descriptive overview of the Airspan’s AirSpeed 1000 Pico-class eNodeB
variant and its place in the Airspan product suite.
1.1 AirSpeed 1000
AirSpeed 1000 is part of Airspan’s carrier-class LTE Advanced outdoor small cell eNodeB family.
AirSpeed 1000 is a Pico-class LTE eNodeB product, providing high-speed data, mobility, Voice over
LTE, and broadcast/multicast services.
AirSpeed 1000 is a super compact, easy to install Pico-class eNodeB. Allowing an operator to deploy
LTE broadband services on any Street Furniture, rooftop or building front.
AirSpeed 1000 is a dual sector / carrier 2x2 MIMO product.
Note: For management please refer to the Airspan LTE Commissioning Manual as well as the
Netspan User Manual.
Note: The AirSpeed 1000 requires operation using an Airspan FCC-specific version of Netspan
acting as a CBRS Domain Proxy.
The AirSpeed 1000 unit is displayed below.
Figure 2: AirSpeed 1000 Front View