Airspan AirSpeed 1000 - Figure 14: Power Cable Attached

AirSpeed 1000 Installation Guide
DUG01289 Airspan Commercial and Internal Use 27
3. Position the pins correctly, the connector is secured to the unit with a locking ring that is
screwed into place. Use firm hand pressure only, the connector has a built in sealing ring.
Caution: The internal plastic parts of the mating connector are keyed. Take care to align
these by visual inspection or by gently rotating the connector body until the key way
sections align and the pins go in before tightening the locking ring.
Figure 14: Power Cable Attached