AirSpeed 1000 Installation Guide
DUG01289 Airspan Commercial and Internal Use 28
A Job Sheet
This job sheet enables the users to keep track of their installation. It covers all the prerequisites required
for accomplishing the AirSpeed 1000 installation.
o Position on Pole / Wall
o Access restrictions (local regulations) (when applicable)
o Method of reaching pole or wall positions (ladders, Elevated work platform)
o Configuration programming details known
o Point of connection for Ethernet (if applicable)
o All equipment items available at the installation site
o AirSpeed 1000 unit
o Mounting bracket
o Ethernet cable assembly
Tool Requirements
(For further information, see Verify the Tools.)
o Large flat bladed screw driver
o 13 mm wrench
o 10 mm or 13/32 inch wrench
o Large pliers
o Hammer (to insert and set the wall plugs)
Required Ancillary Equipment
o Laptop PC for initial configuration
o Ethernet cable for temporary connection of the lap top
To Next Page
Loading...
