1
⑴. Characteristics:
S Series Clean Bench （ herein after briefly called Clean Bench ） is a kind of
general-purpose air purifying equipment that provides local high cleanliness work
environment. It is mainly used in medical institutions, and also industries and scientific
laboratories such as electron, national defense, precision instrument & meter, pharmacy,
chemical industry, agriculture and biology etc. It may help on improving process
environment, product quality and product yield.
⑵. Operation Condition:
Temperature： 5℃～40℃.
Relative Humidity： no more than 90%(at 40℃).
Air Pressure： 86kPa～106kPa.
Altitude： Under 2km
Pollution Degree： 2
Overvoltage category：II
Max. Concentration：3500 Particles/L (@≥0.5μm).
Power Source： AC 220V±22V, 50/60Hz±1Hz.
⑶. Safety Precautions:
◆ Basic Safety Precautions:
z Clean bench is indoor equipment, please do not use it outdoors. And Keep the
product away from dust and vibration sources.
z Clean bench is not explosion-proof, it is strictly prohibited to use it in flammable and
explosive environment.
z Please put clean bench on the even ground and keep it away from air flow
interference.
z Do not clean the clean bench with organic solvent so as to avoid damaging the
surface coating or causing discoloration.
z Do not use the product in the low/high temp, wetter, dew over, lampblack, dusty and
chemical etching locations.
z Do not wash the clean bench with water.
z Do not impact against glass in order to avoid injury of human body.
z Reserve enough maintenance space while locating the clean bench.
1. PRODUCT INTRO & PRECAUTIONS
To Next Page
Loading...