9
Please contact our company if there is no effect after taking above measures.
⑴. The clean bench usually uses wooden case packaging. General transport is
applicable to packed clean bench. Transportation and storage should be in strict
accordance with the packing, shipping and storage mark. Collision and flipping over
are prohibited. Protect against rain & snow in order to avoid rust and damage.
⑵. During transit, please choose a proper forklift according to the weight of clean bench.
⑶ The clean bench shall be stored in the warehouse with -10℃ ~ +40℃ temperature,
less than 85% relative humidity, and no corrosive gas such as acid and alkali.
⑴. Be careful when unpacking the unit to avoid defacing the clean bench in the package.
⑵. After unpacking, please verify the unit is the clean bench you ordered, then check all
the items carefully, make sure no missing items according to the Packing List and
also check if there is any damage occurs in transit, if yes, please inform the dealer or
us in time for future instructions.
Problem Cause Remedy
Inoperative buttons on
control panel
⑴.
No power connection.
⑵ .
Faulty circuit board or
control panel.
⑴.
Connect to the power supply reliably.
⑵
Check the wiring and fuse or replace
the faulty one if necessary.
The fan is in high
speed state but the air
velocity is still low.
⑴ .
Pre-filter is dusty.
⑵ .
HEPA filter failure.
⑴.
Clean Pre-filter or replace with new
one.
⑵.
Replace HEPA filter.
Fan does not work.
⑴.
Circuit failure, no output.
⑵.
Fan failure.
⑴.
Check the wiring or replace circuit
board if necessary.
⑵.
Check or replace the fan.
No output of the
spare socket.
Fusing due to overloading.
Replace fuse with same capacity one,
choose proper external device.
The Light or UV light
cannot be on.
⑴. Light base or starter is
loose or damaged.
⑵. Tube damaged.
⑶ Ballast damaged.
⑷ Circuit failure.
⑴. Replace the starter.
⑵. Check it or replace the tube.
⑶ Check or replace ballast.
⑷ Check the wring, replace the faulty
parts if necessary
7. TROUBLESHOOTING
8. TRANSPORT AND STORAGE
9. UNPACKING AND CHECK
To Next Page
Loading...