8
◆ Normal Operation:
During normal operation, press the Light/Sterilizing Button to turn on the light and keep
the fan running at medium speed (STD mode).
User also can switch the fan speed to high speed or low speed by pressing Fan Button
repeatedly as per need.
◆ Operation finished:
After the operation is finished, keeps the fan running for more than 10 minutes
before turning off the fan by pressing the Fan button, press the Light/Sterilizing
Button to off the light, and last shut off the power.
⑵ Operation Cautions:
z Newly installed clean bench or which is unused for a long time, it is recommended to
be cleaned with super clean vacuum cleaner or dust free cloth.
z When the clean bench is in use, please keep the sliding door at a proper height, too
high (to top) or too low (fall to work table) will affect the air velocity and cleanliness in
the working chamber.
z Do not put any unnecessary articles in the working chamber to prevent the airflow
from interference.
z Forbidden to write on the working table and avoid obvious action that may disturb
airflow while working.
z Do not block the pre filter air inlet, lest affect the airflow volume and in the end reduce
the purification ability.
z The product should be away from the electromagnetic interference.
z Please keep the clean bench in normal working state when doing sedimentary
bacteria concentration test.
To Next Page
Loading...