Need help?Do you have a question about the AirTools Voice Processor 2x and is the answer not in the manual?
General| Type | Voice Processor |
|---|---|
| EQ | 3-band |
| Compressor | Yes |
| De-Esser | Yes |
| Noise Gate | Yes |
| Input Channels | 2 |
| Output Channels | 2 |
| Sample Rate | 48 kHz |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz - 20 kHz |
| Mic Inputs | 2 |
| Line Inputs | 2 |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ohms |
| Power Supply | External |
| Connectors | XLR, TRS |
Outlines essential safety guidelines for operating the equipment safely.
Warns against incorrect connection of RJ45 ports to prevent damage.
Highlights the main features like DSP modules and preset management.
Explains how to connect the AC power cord and remote control units.
Details connections for Ethernet networking and Word Clock synchronization.
Guides on using internal jumpers to set line outputs to microphone level.
Instructions for installing the control software from CD or website.
Steps to connect the software to the Voice Processor 2x unit.
Instructions on how to update the firmware to match the application version.
Outlines the terms and conditions of the product's limited warranty.
Explains how to obtain service, including return authorization and shipping.
To Next Page
