To Next Page
K
Karen FrostAug 17, 2025
What to do if my AIRTRONICS MX-Sport transmitter will not bind to the receiver?
- KKaren AllenAug 17, 2025
If your AIRTRONICS Remote Control transmitter isn't binding to the receiver, consider these potential causes: Ensure you quickly press the transmitter Bind Button after releasing the receiver Bind Button to avoid too much time elapsing. Confirm that you are using a compatible receiver, as the transmitter is only compatible with Airtronics 2.4GHz FHSS-2 surface receivers. If using an electronic speed control (ESC), disconnect it and use a standard receiver battery for the Binding procedure, then reconnect the ESC after binding.
General
