11
SWITCHING BETWEEN PAIRING METHODS
You can easily switch between Open and Closed pairing methods.
With power turned off, hold down MODE button and then turn the
power on.
You can also change the Pairing method using the AirTurn
Manager.
PAIRING IN AIRDIRECT MODE 1
Note: This MODE is for AirDirect specific apps only. AirDirect
MODE was created to prevent conflicts with the virtual keyboard.
1. Power on the PEDpro.
2. Be sure the PEDpro is in MODE 1. (Hold down the
MODE button for 1 blink of the red light.)
3. Go to your app and find the Bluetooth setup screen.
4. Find the PEDpro in the device list and tap on it.
5. If required, Tap on the Pair button in the dialog box.
PAIRING IN MODE 2-6 (KEYBOARD/MOUSE)
Open your devices’ Bluetooth Setup dialog:
iOS – Select Settings>Bluetooth and turn on the Bluetooth if it is
off. When the PEDpro is discovered, it will appear in the list of
devices. Tap on the selection. A dialog box will then appear. Tap
on Pair.
To Next Page
