8
MODE 7: MIDI
MIDI control for sending basic MIDI commands to your app.
Support for Bluetooth MIDI required and special setup for your
tablet or computer may be required. MIDI commands may be
setup using the AirTurn Manager. More detailed instructions
available online.
CHANGING THE MODE
1. Turn on the PEDpro.
2. Press and hold the MODE button. The red LED will flash
once per second from 1 to 7 flashes. The number
of flashes corresponds to the MODE number.
Be sure to count the flashes.
3. Release the MODE button following the number of
flashes that reflects the desired MODE. The blue and red
LEDS will flash together the number of times indicating
which MODE has been set.
Example: To set MODE 2, hold the MODE button for 2
flashes of the red LED, release, and both LEDs will flash 2
times to confirm the MODE 2 setting.
Note: Once the MODE has been set, it will remain the same
until it is changed following the above steps.
To Next Page
Loading...
