12
Selection of installation location
Basic requirement
Installing the unit in the following places may cause malfunction. If it is
unavoidable, please consult the local dealer:
volatile objects spread in the air.
2.
1.
The place with strong heat sources, vapors, flammable or explosive gas, or
equipment).
The place with high-frequency devices (such as welding machine, medical
3. The place near coast area.
4.
The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7.
The appliance shall not be installed in the laundry.
2.
Outdoor unit
will not affect neighborhood.
The location should be well ventilated and dry, in which the outdoor unit
Tools for installation
2 Screw driver
13 Inner hexagon spanner 14 Measuring tape
Note:
5 Pipe expander
8 Pipe cutter
11 Pressure meter
1 Level meter
4 Drill head
7 Open-end wrench
10 Vacuum pump
●
3 Impact drill
6 Torque wrench
9 Leakage detector
12 Universal meter
Please contact the local agent for installation.
3.
won't be exposed directly to sunlight or strong wind.
4.
The location should be able to withstand the weight of outdoor unit.
Make sure that the installation follows the requirement of installation
dimension diagram.
5. Select a location which is out of reach for children and far away from animals
as truck) or in the corrosive environment (such as chemical factory).
or plants.If it is unavoidable, please add the fence for safety purpose.
8. It’s not allowed to be installed on the unstable or motive base structure (such
To Next Page
Loading...
Need help?
General
