Airwell DLSE Series User Manual

OPTIONAL ACCESSORIES
16-1SM DLSDCI 3-A.1 GB
16. OPTIONAL ACCESSORIES
16.1 Base Heater
Before starting the heaters connection verify that the unit is
disconnected from main power supply!!
BASE HEATERT INSTALLATION INSTRUCTIONS
Instructions:
1. Open the outdoor unit electrical cover and service panel.
2. Connect the base heater wires to connections marked as “BH” on the main controller (refer to
Figure 1).
3. Route the wires into the cable holders and through the grommet and attach the wires with
strips to other wires as per Figure 1 & 2.
4. Locate the heater under the outdoor base.
5. Close the outdoor electrical cover and service panel.
SPARE PART LIST
Service Manual
Multi Trio-72/Quattro-80 DCI 16-8 Revision 0
16.3 Base Heater
PN: 439878
Check the installation manual for further information
The kit includes:
1. One 70W PT heating element.
2. One Heater holder.
3. Two magnets for assemble of heater to outdoor base.
4. 4 Strips
Instructions:
1. Open the outdoor unit electrical cover and service panel.
2. Connect the base heater wires to connections marked as “BH” on the main controller (refer
to figure 1).
3. Route the wires into the cable holders and through the grommet and attach the wires with
strips to other wires as per Figure 1 & 2.
4. Locate the heater under the outdoor base with the magnets according to figure 3.
5. Attach with strips the wires to the pipes and the base unit.
6. Close the outdoor electrical cover and service panel.
Figure 1
Figure 2
CRANK CASE HEATERS INSTALLATION INSTRUCTIONS
Before starting the heaters connection verify that the unit is
disconnected from main
p
ower su
pp
l
y
!!
Install off-shelf heater up to 70Watts

Airwell DLSE Series Specifications

General

Brand	Airwell
Model	DLSE Series
Category	Inverter
Language	English