ELECTRONIC FUNCTION
DCH DCI 33 Version - 1
room temperature detected from its own room
temperature sensor and setting temperature.
9.4.13 Silence operation (optional)
Press the “silence” button on remote controller
to initiate SILENCE function. When the Silence
function is activated, the compressor running
frequency will keep lower than F2 and the indoor
unit will bring faint breeze, which will reduce the
noise to the lowest level and create a quiet and
comfortable room for you.
9.4.14 Point check function
Press the LED DISPLAY or LED or MUTE button of the remote controller three times, and then press the
AIR DIRECTION or SWING button three times in ten seconds, the buzzer will keep ring for two seconds.
The air conditioner will enter into the information enquiry status. You can press the LED DISPLAY or AIR
DIRECTION button to check the next or front item’s information within 27 seconds.
When the AC enter the “information enquiry” status, it will display the code name in 2 seconds, the details
are as follows.
Compressor continuous running time
Compressor continuous running time
Causes of compressor stop.
Causes of compressor stop.
To Next Page
Loading...
Need help?
General
