- 15 -
If you are not going to use the H3T for over 48 hours, Please turn off the power switch.
When bring H3T to other vehicles, make sure the battery is xed.
1.
2.
When you release the operation handle during driving and the handle has returned to the central position, but the H3T
does not stop, please lock the electrical door as soon as possible and contact the nearest dealer.
Attentions after Operation:
Battery usage:
Auxiliary charge: such as short delivery time, users can directly use the battery.If the delivery time is longer (2 months or longer),
the battery will lose power during storage and transport. It is better to charge the battery before use. To charge it requires plugging
the exclusive charge to the battery charging hole and connecting AC100-240V power source for 5 hours until the charger is full.
The normal charge of the battery: the operation of AIR is also the discharge process of the battery. The battery should be charged
immediately after the use of the power-assisted vehicle.
Please turn off the power if not riding.
The connectors of the battery box should be xed tightly according to the requirements (the battery box connecting line has been
reliably connected before ex-factory). Loosened or wrong connection will cause the related parts abnormal and lead to serious
damage.
1.
2.
3.
Lithium batteries can not be close to open re or high temperature heat source, can not be thrown into water and can not be
exposed in the sun in high temperature season.
Do not disassemble and decompose, as the internal part of them lithium battery has been packaged intactly.
The waste lithium battery of the product is to be recycled by the enterprise or dealer, and the government designated outlets. Please
do not throw away the waste battery, so as not to pollute the environment.
4.
5.
6.
To Next Page
Loading...
Need help?
General
