En
PRESETTING STATIONS
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1
Press the TUNER button to select a band, and
press the TUNING UP or DOWN button to select
a station.
2
Press the SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
ENGLISH
10
RADIO RECEPTION
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1
Press the TUNER button to select a band.
2
Press the numeric buttons to select a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER button to select a band. Then, press the
STATION PRESET N UP or M DOWN button repeatedly.
Each time the button is pressed, the following number is selected.
To clear a preset station
Use the remote control.
Select the preset number of the station to be cleared. Then, press
the s CLEAR button, and press the a SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
To Next Page
Loading...
