Aiwa XS-G5 EZ - User Manual

SERVICE MANUAL
DATA
COMPACT DISC
STEREO SYSTEM
BASIC TAPE MECHANISM : BZM-1 R1NM
BASIC CD MECHANISM : BZG-5 ZD3NM
XS-G3
XS-G4
XS-G5
U,LH,EZ,K
EZ
EZ,K
S/M Code No. 09-013-441-5R1
REVISION
SPEAKERSYSTEM
CD
CASSEIVER
REMOTE
CONTROLLER
XS–G3(U,LH) RC–BAS11CX–G3 SX–G3
RC–BAS03XS–G3(EZ,K) CX–G3 SX–G3
RC–BAS11XS–G4(EZ) CX–G4 SX–G4
RC–BAS11XS–G5(EZ) CX–G5 SX–G5
RC–BAS03XS–G5(K) CX–G5 SX–G5
• This Service Manual is the "Revision Publishing" and replaces "Simple Manual"
XS-G3 (U,LH,EZ,K) / XS-G4 (EZ) / XS-G5 (EZ,K), (S/M Code No. 09-012-441-5T1).
• If requiring information about the CD mechanisim, see Service Manual of BZG-5,
(S/M Code No. 09-00C-353-3N2)
All manuals and user guides at all-guides.com
all-guides.com

Summary

Product Specifications

Laser Safety Precautions

Eye Protection During Servicing

Critical warnings and instructions for avoiding laser exposure during servicing.

Optical Block Replacement Precaution

Advice on preventing damage to the laser diode during optical block replacement.

Pre-Repair Procedures and Checks

Electrolytic Capacitor Discharge Procedure

Safety procedure for discharging power supply capacitors before service.

Microcomputer Verification Steps

Steps to diagnose microcomputer issues before replacement.

System Adjustment Procedures

Tuner Section Adjustments

Deck Section Adjustments

Front Section Adjustment

CD Test Mode Operations

Displaying Automatic Adjustment Results

Tape Mechanism Exploded View

Tape Mechanism Parts List

Speaker Unit and Panel Service

Aiwa XS-G5 EZ Specifications