AJA KUMO User Manual

KUMO Quick Start Guide v4.2 1 www.aja.com
KUMO
Quick Start Guide
Introduction
This Quick Start Guide provides a basic overview of KUMO system connections
and configuration.
KUMO Router Connections
Figure 1. KUMO Rear Panel Connections (3232 shown, other models similar)
SDI Video Inputs 1-32
(Top Two Rows)
Redundant 12 VDC
Power Supplies
PS1 & PS2
RJ-45 Ethernet
10/100/1000
LAN Connector
REF BNCs
Ext Ref Video
Looping
RS-422 Serial
9 Pin Female
D Connector
Identify
LED
Resessed
Reset Button
SDI Video Outputs 1-32
(Bottom Two Rows)
Published May 1, 2017

AJA KUMO Specifications

General

Brand	AJA
Model	KUMO
Category	Switch
Language	English

Summary

Introduction and Router Connections

Introduction to KUMO

Provides a basic overview of KUMO system connections and configuration.

KUMO Router Rear Panel Connections

Details the rear panel connections for KUMO routers, including power, network, and video.

Hardware and Connector Details

Power Connectors (PS 1 & PS 2)

Explains the redundant 12 VDC power supply connectors and their latching mechanism.

RJ-45 Ethernet Connector

Details the Ethernet port for network connectivity, web server access, and protocol control.

REF BNC Connector

Describes the looping input BNC for synchronizing crosspoint timing with house video signals.

Video Inputs and Outputs

Covers the SDI video input and output BNC connectors and their normal mode operation.

RS-422 Connector

Details the RS-422 female DB-9 connector for serial connections and interoperability.

KUMO Control Panel Connections

Explains the Ethernet and power supply connectors for the KUMO Control Panel.

System Configuration and Network Setup

Quick Start Configuration

Guides users through the initial setup and connection of KUMO router and CP.

DHCP and Auto Discovery

Explains connecting KUMO to a DHCP network and utilizing computer auto discovery methods.

Temporary Static IP Address Configuration

Details setting a direct, fail-safe static IP address for initial connection and configuration.

TCP-IP Network Connection and DHCP

Covers TCP-IP networking, consistency between DHCP and static IPs, and default DHCP setup.

Static IP Configuration

Explains how to set fixed IP parameters via the KUMO UI Network screen for network integration.

Controlling KUMO via Web Page

Guides on selecting and controlling KUMO devices through their web-based user interface.

Assigning Control Panel Router Buttons

Details how to assign specific KUMO routers to control panel buttons for multi-router systems.

Locating KUMO Devices on the Network

Explains using the Identify button to physically locate KUMO routers and control panels.