AJAX Button User Manual

Operating principle
Button is a wireless panic button that, when pressed, transmits an alarm to users,
as well as to the security company’s CMS. In Control mode, Button allows you to
control Ajax automation devices with a short or long press of a button.
In panic mode, the Button can act as a panic button and signal about a threat, or
inform about an intrusion, as well as a fire, gas or medical alarm. You can choose
the type of alarm in the button settings. The text of alarm notifications depends on
the selected type, as well as the event codes transmitted to the central monitoring
station of the security company (CMS).
You can bind the action of an automation device ( , or ) to a button
press in the Button — Scenarios menu.
1. Alarm button
2. Indicator lights
3. Button mounting hole
Relay WallSwitch Socket
settings

AJAX Button Specifications

General

Type	Wireless panic button
Communication Protocol	Jeweller
Power Supply	CR2032 battery
Battery Life	Up to 5 years
Weight	16 g
Water Resistance	IP54
Number of Buttons	1
Accidental Click Protection	Yes
Transmitter Power	Up to 20 mW
Modulation	GFSK
Operating Humidity	Up to 75%
Ingress Protection	IP54
Communication Range	Up to 1300 meters in open space
Operating Temperature Range	From -10°C to +40°C
Compatibility	Ajax hubs
Alarm Type	Panic
Communication Range with Central Unit	Up to 1300 m in an open space
Operating Frequency	868.0–868.6 MHz or 868.7 – 869.2 MHz, depending on the region