AJAX Button User Manual

Alert with a siren if panic button is pressed
If active, added to the systemare
activated after panic button pressing
Scenarios
Opens the menu for creating and configuring
scenarios
User Guide Opens the Button user guide
Temporary Deactivation
Allows a user to deactivate the device without
deleting it from the system.
The device will not execute system commands
and participate in automation scenarios. The
panic button of a deactivated device is disabled
Unpair Device
Disconnects Button from the hub and deletes its
settings
Operating indication
Button status is indicated with red or green LED indicators.
Category Indication Event
Linking to security system
Green LEDs flash 6 times
The button is not registered in
any security system
Lights up green for a few
seconds
Adding a button to the security
system
Command delivery indication
Lights up green briefly
Command is delivered to
security system
Lights up red briefly
Command is not delivered to
security system
Long press indication in Control
mode
Blinks green briefly Button recognized the pressing
as a long press and sent the
Double press— in order to send alarm you
should double-press on the button with a
pause of no more than 0.5 seconds.
sirens
Learn more about device temporary
deactivation

AJAX Button Specifications

General

Type	Wireless panic button
Communication Protocol	Jeweller
Power Supply	CR2032 battery
Battery Life	Up to 5 years
Weight	16 g
Water Resistance	IP54
Number of Buttons	1
Accidental Click Protection	Yes
Transmitter Power	Up to 20 mW
Modulation	GFSK
Operating Humidity	Up to 75%
Ingress Protection	IP54
Communication Range	Up to 1300 meters in open space
Operating Temperature Range	From -10°C to +40°C
Compatibility	Ajax hubs
Alarm Type	Panic
Communication Range with Central Unit	Up to 1300 m in an open space
Operating Frequency	868.0–868.6 MHz or 868.7 – 869.2 MHz, depending on the region