assigned to
Operating mode
Displays the operating mode of the button. Three
modes are available:
Alarm type
(available only in panic mode)
Selection of the Button alarm type:
The text of SMS and notifications in the
application depend on the selected type of alarm
LED Brightness
This displays the current brightness of the
indicator lights:
Accidental press protection
(available only in panic mode)
Displays the selected type of protection against
accidental activation:
Panic — sends an alarm when pressed
Control — controls automation devices by
short or long (2 sec) pressing
Mute Fire Alarm — when pressed, mutes the
fire alarm of FireProtect/FireProtect Plus
detectors
Learn more
Intrusion
Fire
Medical
Panic button
Gas
Disabled (no display)
Low
Max
Off — protection disabled.
Long press— in order to send alarm you
should hold the button down for more than 1.5
seconds.
To Next Page
Loading...
