LED Brightness
Displays current brightness level of indicator light:
Protection against accidental activation
Displays the selected type of protection against
accidental activation:
Routed Through ReX
Display the status of using the ReX range
extender
Temporary Deactivation
Displays the status of the device: active or
completely disabled by the user
Firmware Button firmware version
ID Device ID
Configuration
You can adjust the device parameters in the settings section:
Parameter Value
First field Name of the device, can be changed
Room The choice of the virtual room that the device is
Mute Fire Alarm
Disabled (no display)
Low
Max
Off — protection disabled.
Long press — in order to send alarm you
should hold the button down for more than 1.5
seconds.
Double-pressing — in order to send alarm you
should double-press on the button with a
pause of no more than 0.5 seconds.
1. Ajax app Devices Button Settings
To Next Page
Loading...
