The Ajax system can transmit alarms to the PRO Desktop monitoring app as
well as the central monitoring station (CMS) via SurGard (Contact ID), SIA (DC-
09), ADEMCO 685, and . See the list of CMSs to
which you can connect the Ajax system .
KeyPad can transmit the following events:
When an alarm is received, the operator of the security company monitoring
station knows what happened and where to send the fast response team. The
addressability of each Ajax device allows you to send not only events but also
the type of the device, the security group, the name assigned to it, and the room
to the PRO Desktop or to the CMS. The list of transmitted parameters may differ
depending on the type of the CMS and the selected communication protocol.
The device ID and the number of the loop (zone) can be found in its states in the Ajax
app.
Indication
When touching KeyPad, it wakes up highlighting the keyboard and indicating the
security mode: Armed, Disarmed, or Night Mode. The security mode is always
actual, regardless of the control device that was used to change it (the key fob
or app).
other proprietary protocols
here
Duress code is entered.
The panic button is pressed (if the Function button works in the panic
button mode).
The keypad is locked due to an attempt to guess a code.
Tamper alarm/recovery.
Hub connection loss/restoration.
The keypad is permanently deactivated/activated.
Unsuccessful attempt to arm the security system (with Integrity Check
enabled).
To Next Page
Loading...
Need help?
General
