For example: 2 → * → 4422 →
To use a duress code of a person unregistered in the system:
Enter the duress code set in Keypad Access Codes and press the disarming key
.
For example: 4567 →
How the re alarm muting function works
Using the KeyPad, you can mute the interconnected fire detectors alarm by
pressing the Function button (if the corresponding setting is enabled). The
reaction of the system to pressing a button depends on the state of the system:
With the update, users can mute fire alarms in their groups without
affecting detectors in the groups to which they do not have access.
Functionality Testing
The Ajax system allows conducting tests for checking the functionality of
connected devices.
The tests do not start straight away but within a period of 36 seconds when
using the standard settings. The test time start depends on the settings of the
detector scanning period (the paragraph on Jewellersettings in hub settings).
Interconnected Fire Detectors Alarms have already propagated — by the
first press of the Function button, all sirens of the fire detectors are muted,
except for those that registered the alarm. Pressing the button again mutes
the remaining detectors.
The interconnected alarms delay time lasts — by pressing the Function
button, the siren of the triggered Ajax fire detectors is muted.
Learn more about Interconnected Fire Detectors Alarms
OS Malevich 2.12
Learn more
To Next Page
Loading...
Need help?
General
