AJAX Motion Protect - Page 5

Parameter
Value
Temperature
Temperature of the Detector. Measured on the processor and
changes gradually
Jeweller Signal Strength
Signal strength between the hub and the detector
Connection
Connection status between the hub and the detector
Battery Charge
Battery level of the detector, displayed in increments of 25%
Lid
The tamper mode of the detector, which reacts to the
detachment of or damage of the body
Delay when entering, sec
Delay time when entering
Delay when leaving, sec
Delay time when exiting
Routed through ReX
Displays the status of using the ReX range extender