Activation of the delay when Night mode
is enabled
What is night mode
If active, the detector switches to the
armed mode when night mode is enabled
What is night mode
Alert with a siren if motion is detected
If active, HomeSiren and StreetSiren
are activated when motion is detected.
Jeweller Signal Strength Test
Switches the detector to the Jeweller
signal strength test mode. The test
checks the signal strength between the
hub and the detector, and helps to
determine the optimum installation place
What is Signal Strength Test
Wings Signal Strength Test
Switches the detector to the Wings signal
strength test mode. The test checks the
signal strength between the hub and the
detector, and helps to determine the
optimum installation place
To Next Page
Loading...