AJAX MotionCam - Page 14

The higher the resolution, the more
detailed the image is, but it takes longer
to transmit the photos to the hub
Send photo in case of alarm
When triggered, the detector takes from 1
to 5 photos.
If the No photo option is selected, the
detector does not activate the camera
when triggered.
Alarms with photo confirmation
MotionCam can take photos every time
alarm is raised or only while first 1 to 10
activations. The limit is reset once the
security system is disarmed
Delay when entering, s
Selecting delay time when entering.
Delay when entering (alarm activation
delay) is the time you have to disarm the
security system after entering the room
What is delay when entering
Delay when leaving, s
Selecting the delay time when exiting.
Delay when exiting (alarm activation
delay) is the time you have to exit the
room after arming the security system
What is delay when leaving