The detector’s light lter should be directed perpendicularly to the expected
entry path to the room.
Make sure that no furniture, home plants, vases, decorative or glass structures
are blocking the detector’s eld of view.
We recommend installing the detector at a height of 2.4 m!
Installing the detector at any other height will narrow the detection zone,
affecting the quality of motion detection.
Keep in mind that MotionProtect Curtain does not detect movement behind the
glass. Therefore, do not install the detector in places where glass structures
may block its range of view, e.g., in places where an open window may obstruct
the device’s eld of view.
Detector Installation
Before installing the detector, make sure that you have chosen an appropriate
location as indicated in this manual.
There are two options for installing MotionProtect Curtain:
To Next Page
Loading...
Need help?
General
