Integrity Testing
Ajax security systems can run tests to verify the integrity of connected devices.
The tests start instantly, but no later than within 36 seconds by default. The test
start time depends on the detector polling interval setting (see the Jeweller
section in the Hub settings).
Detector Placement
The effectiveness of the security system depends on detector placement.
Choosing a location to install MotionProtect Curtain, consider the direction of
the light lter and obstacles that may affect the detector’s eld of view and the
radio signal transmission.
The device developed only for indoor use.
Incorrect placement may result in false alarms or faulty operation of the
detector.
Do not install the detector:
Signal Strength Test
Detection Zone Test
Attenuation test
Outside the premises (outdoors)
In front of the windows within reach of direct sunlight
Opposite of the objects that rapidly change temperature (e.g., electric and
gas heaters)
Opposite of the moving objects having a temperature close to that of the
human body (curtains swaying above a heating radiator)
In places with fast air circulation (near fans, open windows or doors)
To Next Page
Loading...
Need help?
General
