Using the SEARCH function
The SEARCH function can be used to select a specific starting point on a DVD
or CD.
● Press the SEARCH button (23).
● Press the digit buttons (24) to select an entry.
The possible entries for DVD are:
Disc time -
Chapter -
Title -
Chapter time -
Title time -
The possible entries for CD are:
Track time -
Specific track -
● Press the digit buttons to set a selection.
Using the PROGRAM function
● Press the PROGRAM button (33) to enter the PROGRAM function.
● Press the digit buttons (24) to select a desired track, and use the arrow
button down (28) to highlight the next entry.
● To confirm the selection and start the program, move the highlight to "START"
and press the ENTER button (29).
● To stop the progam, press the PROGRAM button (33) and press the
ENTER button (29).
Using the ZOOM function
This function can be used for zooming in and out on photos and DVDs.
The available zoom ratios are: 2x, 3x, 4x, 1/2x, 1/3x, 1/4x.
● Press the ZOOM button (34).
● Press the ZOOM button (34) again to set the correct size.
● Press the arrow buttons (28) to move through the picture.
Using the MP3/MPEG4 playback function
● Insert an MP3/MPEG4 disc. A content menu will display on the TV
screen.
● Press the up/down arrow buttons (28) to select a folder or a file.
● Press the ENTER button (29) to enter the selected folder or file.
● Press the PROGRAM button (33) to switch between folders and files.
Press the ENTER button (29) to confirm.
To Next Page
Loading...
Need help?
General
