Slave setup menu operation5.5
● Press the MODE button (41) to enter the slave setup menu.
Picture
● BRIGHT to set the brightness of the picture.
● CONTRAST to set the contrast of the picture.
● COLOR to set the colour of the picture.
● LANGUAGE to set the language of the country.
● RESET to restore the default settings.
Sound
● VOLUME to set the volume.
Cleaning and maintenance6.
!
WARNING
Before performing any cleaning or maintenance, switch off and
unplug the appliance.
● Clean the outside of the appliance with a soft cloth. When the appliance is
very dirty, dampen the cloth slightly with water and a neutral solution.
Handle and care of a disc6.1
● Hold the disc with ngers. Hold the disc outer edge and/or the centre
spindle hole. Do not touch the disc surface.
● Do not bend or press the disc. Do not expose the disc to direct sunlight or
heating sources.
● Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc
surface gently, radially, from centre towards the outer edge.
● Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
Such cleaning uids will permanently damage the disc surface.
To Next Page
Loading...
Need help?
General
