Using the JPEG playback function
● Insert a JPEG disc. A content menu will display on the TV screen.
● Press the up/down arrow buttons (28) to select a folder or a le. Press the
ENTER button (29) to start the slide show.
● Press the PLAY/PAUSE button (43) to hold the slide show at the current
picture.
● Press the PLAY/PAUSE button (43) to resume the slide show.
● Press the PREV button (37) or the NEXT button (38) to select the
previous or next picture.
● To magnify the picture, press the ZOOM button (34). To zoom in or out on
the picture, press the FWD button (36) or the REV button (35). To move
the picture, press the arrow buttons (28).
Using the Video CD playback function
● Press the MENU/PBC button (45) to switch on the playback function.
● Insert a Video CD.
● To start playback, press the PLAY/PAUSE button (43) once.
● To select the audio channel during Video CD playback, press the AUDIO
button (44).
● Press the MENU/PBC button (45) to quit the playback and return to the
main menu.
DVD setup menu operation5.4
i
This menu only works in DVD mode.
To change the initial settings
The following actions have to be carried out with the remote control.
● Press the SETUP button (30).
● Press the arrow buttons (left and right) (28) to select a menu. The
submenu is displayed directly.
● Press the arrow buttons (up and down) (28) to enter the submenu.
● Press the ENTER button (29) to select a setting, or the left arrow button to
cancel the selection. If the selection invokes a subsequent submenu,
repeat the previous steps to select a setting.
● Press the ENTER button (29) to store the setting.
● Press the SETUP button (30) to exit.
To Next Page
Loading...
Need help?
General
