General setup page
● TV DISPLAY to set the aspect ratio. The following settings are available:
4:3 PANSCAN, 4:3 LETTERBOX, 16:9, WIDE SQUEEZE.
● ANGLE MARK to display the angle setting information. Switch this
function ON or OFF.
● OSD LANGUAGE to change the language. The following settings are
available: ENGLISH, FRENCH, GERMAN, DANISH, SPANISH, DUTCH,
GREEK.
● CLOSED CAPTIONS to display closed captions. Switch this function ON
or OFF.
● SCREEN SAVER to activate the screen saver. Switch this function ON or OFF.
Audio setup page
Downmix
● Select LT/RT to mix 5.1-channel audio into left channel and right channel.
● Select STEREO to mix 5.1 channel audio into signal stereo.
i
This function is only available for Dolby AC-3 encoded 5.1-channel
discs.
Digital output
● Select SPDIF OFF to switch off the digital audio signal output.
● Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF PCM to set the digital audio signal output to PCM format.
Dolby digital
DUAL MONO
● Stereo: both channels as is. STEREO is the default setting.
● L-Mono: left channel only.
● R-Mono: right channel only.
● Mix-Mono: the average of both the left and right channel.
i
This function is only available for Dolby AC-3 encoded 2-channel
discs.
DYNAMIC
● Select the value for the dynamic range compression to avoid losing sound
details resulting from a low volume.
To Next Page
Loading...
Need help?
General
