Akai ALED2209TWE

English - 54 -
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• You can use the control switch to change the
volume of the TV. To increase volume, please move
the switch upward. Move the switch downward to
decrease the volume. A volume level scale (slider)
will be displayed on the screen.
Programme Selection
• First press the control switch once to change
channel. You can move the switch upward to select
the next programme or move it downward to select
the previous programme.
Viewing Main Menu
• The Main Menu screen cannot be displayed by using
the control switch on the TV.
AV Mode
• Press the control switch consecutively until the
source OSD is displayed on the screen.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
• Press “V ” button to increase the volume. Press “V
” button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press CH button to select the previous
programme.
• Press CH button to select the next programme.
Programme Selection (Direct Access)
• Press the numeric buttons on the remote control to
select programmes between 0 and 9. The TV will
switch to the selected programme.
Switching On/Off
To Switch the TV On
• Connect the power cord to the 110-240V AC, 50/60
Hz.
• Press STANDBY touch button. Then the standby
LED lights up.
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ or P- or a numeric button
on the remote control.
• Press the control switch right side of the TV. The TV
will then switch on.
Note: If you switch on your TV via P+ or P- buttons on
the remote control or on the TV set, the programme
that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Press the “ ” button on the remote control or hold
the control switch on the Tv until shut down , so the
TV will switch to standby mode.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
Note : YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).