English   - 81 -
Some functions (Angle, Zoom etc) do 
not work
• These functions are not available on the DVD.
• Angle can only be changed when the angle symbol 
is displayed.
No picture
• Have you pressed the correct buttons on the remote 
control? Try once more.
No sound
• Check the volume is set to an audible level.
•  Make  sure  you  have  not  switched  the  sound  off 
accidentally.
Distorted sound
• Check that  the appropriate listening  mode setting 
is correct.
No response from remote control
•  Make  sure  the  remote  control  is  in  the  correct 
mode.
• Check batteries are tted correctly.
• Change the batteries.
If nothing works
If you have tried the above solutions and none seem 
to work, try switching your TV-DVD off and on again. 
If this does not work, contact your supplier or TV-DVD 
repair technician. Never attempt to repair a defective 
TV-DVD yourself.
Denition of Terms
Angle
Recorded onto some DVD discs are scenes, which 
have been simultaneously shot from a number of 
different angles (the same scene is shot from the 
front, from the left side, from the right side, etc.). With 
such discs, the ANGLE button can be used to view 
the scene from different angles.
Chapter Number
 These numbers are recorded on DVD discs. A title 
is subdivided into many sections, each of which are 
numbered, and specic parts of video presentations 
can be searched quickly using these numbers.
DVD
This refers to a high-density optical disc on which 
high-quality pictures and sound have been recorded 
by means of digital signals. Incorporating a new video 
compression technology (MPEG II) and high-density 
recording technology. DVD enables aesthetically 
pleasing full-motion video to be recorded over long 
periods of time (for instance, a whole movie can be 
recorded).
DVD has a structure consisting of two 0.6-mm thin 
discs, which are adhered to each other. Since the 
thinner the disc, the higher the density at which the 
information can be recorded, a DVD disc has a greater 
capacity than a single 1.2 mm thick disc. Since the 
two thin discs are adhered to each other, there is the 
potential to achieve double-sided play sometime in 
the future for even longer duration play.
Subtitles
These are printed lines appearing at the bottom of 
the screen, which translate or transcribe the dialogue. 
They are recorded on the DVD discs.
Time Number
This indicates the playtime, which has elapsed from 
the start of a disc or a title. It can be used to nd a 
specic scene quickly. (Not all discs permit the time 
search feature to be used.  Availability is determined 
by the disc’s manufacturer.)
Title Number
These numbers are recorded on DVD discs. When a 
disc contains two or more movies, these movies are 
numbered as title 1, title 2, etc.
Track Number
These numbers are assigned to the tracks, which are 
recorded on AudioCDs. They enable specic tracks 
to be located quickly.
LPCM
LPCM stands for Pulse Code Modulation and is 
digital audio. 
MPEG
Short for Moving  Picture Experts Group. This is an 
international standard for compression of moving 
images. On some DVDs digital audio has been 
compressed and recorded in this format.