English   - 59 -
If you start Digital Aerial scan process, automatic 
scanning  will  start.  You  can  press  “MENU” button 
to cancel. 
If you start Digital Cable scan process, the following 
screen will be displayed.
You can select frequency ranges from this screen. For 
highlighting lines you see, use “ ” or “ ” button. You 
can enter the frequency range manually by using the 
numeric buttons on the remote control. Set Start and 
Stop Frequency as desired by using numeric buttons 
on the remote control. After this operation, you can set 
Search Step as 8000 KHz or 1000 KHz. If you select 
1000 KHz, the Tv will perform search process in a 
detailed way. Searching duration will thus increase 
accordingly. When nished, press OK button to start 
automatic search. Automatic searching screen will be 
displayed during the process.
Note: If you select an extended gap between Start 
and Stop frequency rate, automatic search duration 
will take a longer time..
Clear Service List (*)
(*) This setting is visible only when the Country option 
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “ ” or 
“ ” button to select Clear Service List and then press 
OK. The following OSD message will be displayed 
on the screen:
Press OK to cancel. Select Yes by pressing “ ” or “ ” 
button and press OK to delete all of the channels.
Managing Stations: Channel List
The TV sorts all stored stations in the Channel List. 
You can edit this channel list, set favourites or set 
active stations to be listed by using the Channel List 
options.
• Press MENU button to view main menu. Select the 
Channel List item by using “ ” or “ ” button. Press 
OK to view menu contents.
Select  Edit Channel List to manage all stored 
channels. Use “ ” or “ ”  and OK buttons to select 
Edit Channel List.
Operating the Channel List
• Press “ ” or “ ” button to select the channel that 
will be processed. Press “ ” or “ ” button to select 
a function on Channel List menu.
• Use  CH  or CH  buttons to move page up or 
down.
• Press BLUE button to view ltering options.