EN-ENGLISH
Enable your Bluetooth speaker or Bluetooth headset power ON, and make sure it is in
searching mode.
Waiting for 10-15 seconds, the Bluetooth indicator will be blue, the Bluetooth
connected successfully.
You can enjoy the music from Bluetooth speaker or Bluetooth headset.
Aux function
Turn on the power & volume control knob.
Connect your Smartphone, Tablet, MP3 or other Digital Audio Player to the Aux in
port with a 3.5mm audio stereo jack cable (not included).
You can enjoy the music of the connected device at the turntable player.
Headphone function
Turn on the power & volume control knob.
Connect your headphone, with 3.5 mm stereo jack to the headphone port.
You can enjoy the music of the vinyl records at your headphone.
MAINTENANCE
REPLACING THE STYLUS
-Refer to the figures 1-8
Push the arm lock to
release the tone-arm.
Take off cap of cartridge
to expose the needle
out.
Separate the cartridge
from the socket lightly.
Take off the audio-line
from the cartridges
completely.
To fit a new one just in opposite deals, insert the audio-line accordingly, and install the
cartridge to the socket lightly.
Note: Please exercise extreme care whilst performing this operation so as to avoid the
tone arm and audio line wires from any damage.
INSTALLING A NEW STYLUS CARTRIDGE
-Refer to the figures 5 & 6
To Next Page
Loading...
