EasyManua.ls Logo

Akai ATT-14BT

Akai ATT-14BT
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Do not disassemble the product without permission, as this might result in damage to the
circuits or an electric shock. If a foreign object gets into the unit, contact your dealer or service
company.
When removing the power adaptor from the socket, always pull directly on the plug, Do not pull
on the cord.
To keep the laser pickup clean, do not touch it and always close the disc tray.
Always keep the unit clean. To clean, use a clean, dry cloth. Do not use Benzene or alcohol, as
they will damage the surface of the unit.
Keep this manual in a safe place for future reference.
Moving the Unit
During playback, the disc rotates at high speeds. Do not move or lift the unit during playback as
this may damage the unit and the disc.
When moving the unit to a different location or packing the unit away, be sure to remove the
record or disc. Moving the unit with a disc or record inside may cause damage to the unit.
Compact Discs
Always place the disc in the disc tray with the label side facing up.(Compact discs can be played
or recorded on one side only.)
To remove the disc from its storage case, press down on the center of the case and lift the disc
out, holding it carefully by the edges. Should the disc become dirty, wipe the surface in a
circular motion from the center hole outwards with a soft, dry cloth.
Never use chemicals such as record sprays, anti-static sprays or fluid, benzine or thinner to clean
the disc. Such chemicals will do irreparable damage to the discs plastic surface.
Place the disc back in its case after use to avoid dust and scratches.
Do not expose discs to direct sunlight or high temperatures for extended periods of time. Long
exposure to high temperatures will warp the disc.
Playing warped discs may damage the unit.
Printable discs are not recommended for use with this unit as the label side may be sticky and
damage the unit.
Do not use protective coating spray on the discs.
Do not write on discs with ball point or hard tipped pens. Only use oil-based felt tipped pens.
Do not use stabilizers. Using commercially available CD stabilizers may cause damage to this unit.
Do not use CD’s with an irregular shape as they may damage the Unit.
5

Related product manuals