EasyManua.ls Logo

Akai ATT-14BT

Akai ATT-14BT
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vinyl records
Do not touch the records grooves. Only handle records by their edges or the label. Ensure that
your hands are clean, as skin oil will gradually deteriorate the record.
Keep your records away from dust and store in a dry, cool place.
Keep your records in sleeves when not in use to avoid dust and scratches.
Store records upright. Records stored horizontally will bend and warp.
Do not store records in the trunk of a car.
Store records in an area with a stable temperature and low humidity.
To clean, gently wipe the surface in a circular motion using a soft anti-static cloth.
Replacing the Stylus
It is recommended that the stylus is replaced as soon as you notice a change in the sound quality.
Prolonged use of a worn-out stylus may damage the record. Wear and tear on the stylus will be
accelerated when playing 78 RPM records.
Caution
Do not bend the stylus.
To avoid injury, do not touch the needle.
Turn off the unit’s power before you replace the stylus.
Keep out of reach of children.
Handle with care as the stylus is delicate. Use of a bent or broken stylus may damage the record
and cause malfunction.
Do not expose the stylus to extreme heat.
Contact a qualified repair person if you are having difficulties changing the stylus.
Removing an Old Stylus
Set a flat head screwdriver at the tip of the stylus and push down to the direction “A”.
Pull the stylus out towards direction “B”.
Installing a New Stylus
Hold the tip of the stylus and insert the other edge by pressing towards direction “C”.
Push the stylus up towards direction “D” until it locks at the Tip.
6

Related product manuals