Akai GX-77

Continuous Playback
Attach two pieces of sensing tape at the two points where the direction
of tape travel is to be changed. When the sensing tape comes in contact
with the sensing pin the direction will change automatically. Thus con-
tinuous playback forward to reverse to forward and so on is possible.
Set the Reverse (REV) SELECTOR to (> and refer to the chart for a
more detailed explanation.
* Recording will take place as in = mode.
* Do not attach sensing tape to any point other than where you want
to change direction for continuous playback.
Sensing tape
Recording side
Pas
SISSSSSSSSSSASSAS LS RRaBa’
CLLLLL eC hdheldd hbk dheddckked de dendedodokode}
REV
SELECTOR
—_
a Cap
he |e
ONE— ONE-WAY
REV
SELECTOR
— SS «CS
NL 2
I
I
>
e
°
3
is“
&
>
®
«
t
ae]
=
©
3
-
°
~ TWO-WAY
REV
SELECTOR
—_ a (CS)
mae 3
1 if
Lm)
CONTINUOUS
<—_——_Tape Travel
13
. When the Forward ( ») button is pressed,
playback in forward direction is possibie,
The deck will go into stop mode at the end of
the tape.
. When the Reverse ( ~«¢ ) button is pressed, play-
back in reverse direction is possible.
The deck will go into stop mode at the end of
the tape.
. When the Forward ( ™) button is pressed,
after once cycle (forward to reverse only) of
playback is complete (all the tape is taken up
on one reet}) the deck will go into stop mode.
. When the Forward ( » ) or the Reverse ( « )
button is pressed, the deck will go into con-
tinuous playback. Press the stop {@) button
to stop playback.