Akai GX-F44R

2. PLUNGER POSITION ADJUSTMENT
1) Forward Plunger Adjustment (Refer to Figs. 18,
20)
Set the AKAI Head Projection Gauge. (TF-111CJ)
Adjust the screws (a) and (b) so that when FWD
PAUSE mode is engaged, the Head Projection
Gauge indicates to 2.7 mm + 0.1 mm.
2) Brake Plunger Adjustment (Refer to Figs. 19, 20)
Set the AKAI Head Projection Gauge.
Adjust the screws (a) and (b) so that when FWD
PLAY mode is engaged, the Head Projection
Gauge indicates to 3.35 mm + 0.1 mm.
3) Reverse Plunger Adjustment (Refer to Figs. 18,
20)
Set the AKAI Head Projection Gauge.
Adjust the screws (c) and (d) so that when REV
PAUSE mode is engaged, the Head Projection
Gauge indicates to 2.5 mm + 0.1 mm.
NOTE: This adjustment made is order of numbers.
Fig.20 AKAI Head Projection Gauge (TF-111CJ)
21