Akai GX-F44R

X. ELECTRICAL ADJUSTMENT
DIGITAL
VOLTMETER (DC)
: Fig.26 Drive PCB
REFERENCE
CLEAN POLE
DETECTION
TAPE GUIDE
Fig. 27
1. QUICK REVERSE SENSITIVITY
ADJUSTMENT
1) Make a tapeless cassette pack by removing the tape
from the white colored test tape.
2) Connect the Digital Voltmeter between the PIN
(A) and earth.
3) Using the tapeless cassette pack, adjust VR1 so
that the Digital Voltmeter readings 6V + 0.2 VDC
at FWD play mode.
NOTE: Clean the Reference Pole and the Detection
Tape Guide, before this adjustment. (Fig.
27)
25