Akai GX-F44R - Page 64

No. 3
MODEL Gx-F44R 7 < —
ITI, MECHANICAL AND HEAD ADJUSTMENT
Refer to Service Manual CS-F33R.
IV, ELECTRICAL ADJUSTMENT
1. QUICK REVERSE SENSITIVITY ADJUSTMENT
DIGITAL YOLTMETER
>
QUICK REV
SENS. VR4
| FLYWHEEL
<7
FRONT
Fig. 2
REFERENCE
POLE
DETECTION
TAPE Guibe
Fig. 3
1) Make a tapeless cassette pack by removing the tape from the white
colored test tape.
2) Connect the Digital Voltmeter between the PIN (A) and earth.
3) Using the tapeless cassette pack, adjust VRl so’that the Digital
Voltmeter readings 6V + 0.2VDC at FWD play mode.
NOTE: Clean the Reference Pole and the Detection Tape Guide, before this
adjustment. (Fig. 3)