MPC1000 v2 Operator’s Manual rev 1.0
11
Other useful functions in the Name window
(Copy and Paste function)
With the copy and paste function, you can copy the
letters in the “New name” field and paste to set a name
to another data. This is useful when you wish to create
similar names for different data.
If you press [F2] (COPY ) key when Name window is
open, the letters in the “New name” field will be cop-
ied (temporarily saved). When you press [F3] (PASTE)
in the Name window , those copied letters can be pasted
to the “New name" field.
Entering numbers with
NUMERIC key
In the value fields such as the sample’s TRIM page, you can
enter numbers directly by using [NUMERIC] key.
01. Press the [NUMERIC] key on an available field.
The key’s LED will blink and allows you to enter
numbers using the pad.
02. Enter numbers by hitting the corresponding pads.
The number indicated on the upper right corner of
the pad is entered. Pad 1 through 9 corresponds
number 1 to 9 and Pad 10 corresponds to number 0.
When you enter the wrong number, hit Pad 16. The
number is canceled and you can enter the correct
number.
03. Hit Pad 12.
That confirms your entry.
When you set the Time field, you can change the unit
(digit) by hitting Pad 11. In fields where you can set
+/-, you can switch + and – by hitting Pad 13.
To Next Page
Loading...
Need help?
General
