15
Version 1.20 Addendum
The VALUE column shows the scene number.
In the case of channels and tracks, currently only channel on/off status is shown as:
XYZnn on/off
where ‘XYZ’ indicates a channel or track and ‘nn’ is the channel/track number. The VALUE
column will show ON or OFF accordingly.
NOTE: In the case of stereo paired channels, the event editor will only show the channel on/off status
in the odd numbered channel. For example, if Tracks 11 and 12 are stereo paired and a channel on/off
operation is performed, the event(s) will only show when TRACK II is selected - the event(s) will not be
shown in TRACK 12
EDITING EVENTS
Events can be deleted and/or moved.
To delete an event, simply press DELETE EVENT. If you make a mistake and accidentally delete an
event, you can use UNDO.
To move an event, press MOVE EVENT. You will see this prompt:
You can either type in a new value or you can move the cursor to the appropriate digit and ‘nudge’ the
value using the DATA ENTRY +/- keys. Press MOVE to actually move the event (or CANCEL to abort). If
you make a mistake, you can use UNDO.
To Next Page
Loading...
Need help?
General
