10
Version 1.20 Addendum
AUTOMATED SCENE RECALL
In V1.20 of the DPS24 OS, it is now possible to automate scene recalls - that is, as the dynamic automa-
tion is running, scenes can be recalled at any time as part of the automation. This can be used to change
EQ settings of one or more channels or to change effects, etc.. Also, even though they can be dynamically
automated, it is also possible to use scene recall to change pan and FX send settings - you could even use
it for fader settings to jump quickly from one mix to another. There are many possibilities.
Of course, before you have any scenes to recall, you must first store some. To store a scene for subse-
quent recall, press SCENE STORE. You will see this pop-u p.
You will note the extra parameter at the bottom of the prompt window. This allows you to select exactly
what will be stored. You can select the following options:
ALL Everything will be stored in the selected scene - fader position, pan positions, FX/
Aux send settings, channel on/off status, EQ and FX settings.
STATIC ONLY Only static controls such as EQ and FX settings will be stored. The faders, pans
and FX settings (i.e. those that can be dynamically automated) will not. This allows
you to recall different EQ settings on one or more channels and also switch different
effects as the track plays.
NO FADERS Everything except the faders will be stored. This allows you to set the mix parameters
such as pan, FX/Aux sends, EQ and FX and regard them as ‘static’ controls without
your dynamic fader mix being affected. Perhaps the best way to use this option is to
set RECORD EVENTS to FADER in the AUTOMATION page and mix your project
using the faders using this option to store different pan, FX/Aux settings, EQ, etc.,
as ‘static’ controls.
To select these options, use the adjacent Q5 Q-link control.
To Next Page
Loading...
Need help?
General
